LICENSE PLATE LIGHT BULB REMOVAL/INSTALLATION

id091800857800

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].) (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

2.  Insert a tape-wrapped fastener remover to the position shown in the figure, release the tabs, and remove the lens.

am3zzw00011646

3.  Remove the license plate light bulb.

am3uuw00005405

4.  Install in the reverse order of removal.