FRONT FOG LIGHT INSPECTION [LED TYPE]

id091800115525

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Partially peel back front mudguard. (See MUDGUARD REMOVAL/INSTALLATION.)

3.  Remove the front fog light bezel No.1. (See FRONT FOG LIGHT BEZEL REMOVAL/INSTALLATION)

4.  Remove the front fog light. (See FRONT FOG LIGHT REMOVAL/INSTALLATION.)

5.  Apply battery voltage to front fog light terminal A, and connect terminal B to ground.

aaxjjw00017409

6.  Verify that the front fog light is turned on.

•  If a front fog light does not turn on, replace it. (See FRONT FOG LIGHT REMOVAL/INSTALLATION.)