REAR DOOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. To remove the checker, remove the following parts:

(1) Regulator handle (vehicles with manual window system) (See REGULATOR HANDLE REMOVAL.) (See REGULATOR HANDLE INSTALLATION.)

(2) Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION.)

(3) Rear door speaker (See REAR DOOR SPEAKER REMOVAL/INSTALLATION.)

3. To remove the hinges, remove the following parts:

(1) Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(2) Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(3) B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

4. Remove in the order indicated in the table.

5. Install in the reverse order of removal.

6. Adjust the rear door. (See DOOR ADJUSTMENT.)

.