1. Disconnect the negative battery cable.
2. Detach the bonnet release lever from the lower panel. (SeeBONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)
3. Remove the front scuff plate. (Driver's side) (SeeFRONT SCUFF PLATE REMOVAL/INSTALLATION.)
4. Remove the front side trim. (Driver's side) (SeeFRONT SIDE TRIM REMOVAL/INSTALLATION.)
5. Remove the lower panel. (SeeLOWER PANEL REMOVAL/INSTALLATION.)
6. Remove the panel light control switch.
7. Disconnect the panel light control switch connector.
8. Install in the reverse order of removal.