DTC U1A4B:54 [REAR VEHICLE MONITORING SYSTEM]


id0902z2668600

DESCRIPTION

Radar aiming is not performed or radar sensor axis is deviated (Rear vehicle monitoring control module (LH))

DETECTION CONDITION
Rear vehicle monitoring control module (LH) radar aiming is out of range for 1 s or more.
POSSIBLE CAUSE
•  Rear vehicle monitoring control module (LH) radar aiming is not performed
•  Rear vehicle monitoring control module (LH) radar sensor axis is deviated
•  Rear vehicle monitoring control module (LH) malfunction

Diagnostic Procedure

STEP

INSPECTION

ACTION

1
PERFORM REAR VEHICLE MONITORING CONTROL MODULE (LH) RADAR AIMING
•  Perform the rear vehicle monitoring radar aiming (LH) using the M-MDS.
•  Clear the DTC from the rear vehicle monitoring control module using the M-MDS.
•  Verify the rear vehicle monitoring system DTC using the M-MDS.
•  Is the same DTC present?
Yes
Perform the rear vehicle monitoring radar aiming (LH) again using the M-MDS, then go to the next step.
No
Go to Step 3.
2
VERIFY TROUBLESHOOTING COMPLETED
•  Clear the DTC from the rear vehicle monitoring control module using the M-MDS.
•  Verify the rear vehicle monitoring system DTC using the M-MDS.
•  Is the same DTC present?
Yes
Replace the rear vehicle monitoring control module (LH), then go to the next step.
No
Go to the next step.
3
VERIFY THAT NO OTHER DTCs ARE PRESENT
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
No
DTC troubleshooting completed.