COMBINATION SWITCH DISASSEMBLY/ASSEMBLY

id091800802600

Warning

•  Handling the air bag module improperly can accidentally deploy the air bag module, which may seriously injure you. Read the air bag system service warnings and cautions before handling the air bag module. (See AIR BAG SYSTEM SERVICE WARNINGS.) (See AIR BAG SYSTEM SERVICE CAUTIONS.)

1.  Switch the ignition to off.

2.  Disconnect the negative battery cable and wait for 1 min or more.

3.  Remove the following parts:

(1)  Driver-side air bag module (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)

(2)  Steering wheel (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITHOUT ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].) (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION [WITH ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)

(3)  Clock spring (See CLOCK SPRING REMOVAL/INSTALLATION.)

(4)  Combination switch (See COMBINATION SWITCH REMOVAL/INSTALLATION.)

4.  Press the tabs in the direction of the arrow (1) shown in the figure, then remove the light switch, and the wiper and washer switch

am6zzw00006873

5.  Assemble in the reverse order of disassembly.