REAR SEAT CENTER ARMREST TRIM REMOVAL/INSTALLATION


id091300814000

1.  Disconnect the negative battery terminal. (With USB power outlet/with rear seat warmer system) (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the rear seat center armrest. (See REAR SEAT CENTER ARMREST REMOVAL/INSTALLATION.)

3.  Disconnect the USB power outlet connector. (With USB power outlet) (See USB POWER OUTLET REMOVAL/INSTALLATION.)

4.  Disconnect the rear seat warmer switch connector. (With rear seat warmer system) (See REAR SEAT WARMER SWITCH REMOVAL/INSTALLATION.)

5.  Remove the C-rings.

ac5wzw00013757

Caution
•  If a C-ring is damaged while removing or installing the rear seat center armrest trim and rear seat center armrest, it may not be possible to install the rear seat center armrest trim and rear seat center armrest normally. When removing or installing the rear seat center armrest trim and rear seat center armrest, be careful not to damage the C-rings.
•  If a C-ring is damaged, replace it with a new one.

6.  Remove the rear seat center armrest trim.

7.  Install in the reverse order of removal.