FRONT SASH MOLDING INSTALLATION

id091600807000

1.  Hook tab A to the body in the position where the clip aligns with the sash holes.

am6zzw00018073

2.  Press the front sash molding in the direction of arrow (1) and install the clip to the body.

Caution

•  Do not press the front sash molding in any place other than the rubber areas.

3.  Press the front sash molding from the vehicle front in the direction of arrow (2) and install tab B.

Note

•  After installing the front sash molding, verify that tabs A and B are connected properly to the body.

4.  Install the following parts:

(1)  Front door garnish. (See FRONT DOOR GARNISH REMOVAL/INSTALLATION.)

(2)  Front beltline molding (See FRONT BELTLINE MOLDING REMOVAL/INSTALLATION.)

(3)  Sail garnish (See SAIL GARNISH REMOVAL/INSTALLATION.)