EXTERIOR LIGHTING SYSTEM
id091800400500
Outline
• Projector type headlights have been adopted to the front combination lights.
• Auto light system has been adopted in which TNS (parking lights), headlight LO, and panel light automatically and optimally illuminate and turn off. (With auto light system)
• A headlight auto leveling system has been adopted which automatically adjusts the headlight optical axis up and down.
• A coming home light has been adopted which turns on the headlight LO for a specified time using the flash-to-pass operation.
• A leaving home light has been adopted which turns on the TNS (parking lights) and headlight LO for a specified time by operating the unlock button on the remote transmitter.
• Outer mirrors with built-in side turn lights have been adopted.
• Rear fog light has been adopted in the trunk lid light (4SD)/liftgate light (WGN). (With rear fog light)
• Secondary collision reduction hazard warning light has been adopted. (With secondary collision reduction hazard warning light)
• An emergency signal system (ESS) has been adopted which flashes the hazard warning lights if the vehicle suddenly decelerates while traveling at high speed
Function
• The front body control module (FBCM) sends an exterior light on/off request signal based on the engine switch condition and light switch position signal, and turns the exterior lights on/off.
Lights off function
-
• If the ignition is switched ACC or off, the front body control module (FBCM) automatically turns the lights off as follows:
|
Engine switch condition
|
Light switch position
|
Rear fog light switch position
|
TNS (parking lights) condition
|
Headlight LO condition
|
Rear fog light condition
|
|
ACC or off
|
OFF
|
ON
|
Off
|
Off
|
Off
|
|
AUTO
|
ON
|
Off/On*1
|
Off
|
Off
|
|
TNS (parking lights)
|
ON
|
On
|
Off
|
Off
|
|
HEAD
|
ON
|
On*1
|
Off
|
Off
|
*1 :When 30 s have elapsed or the driver's door is opened after the ignition was switched ACC or off, the TNS (parking lights) turns off.
Structure/Construction
System structure
System wiring diagram
Operation
Headlights LO, headlights HI, parking lights, front turn lights
-
Running light
-
Rear fog light (with rear fog light)
-
Side turn lights
-
Rear turn lights, brake lights, taillights (rear combination light)
-
Back-up lights, taillights (trunk lid light) (with taillights (trunk lid light)), taillights (liftgate light)
-
Hazard warning lights
-
-
Secondary collision reduction hazard warning light (with secondary collision reduction hazard warning light)
-
1. If the SAS control module detects a collision with another vehicle, it outputs (1) a secondary collision reduction hazard warning light request signal to the front body control module (FBCM).
2. The front body control module (FBCM) flashes (2) the turn lights during a collision to caution surrounding vehicles when it detects a certain amount of impact.
-
― While the secondary collision reduction hazard warning light is operating, all the turn lights are flashed automatically. The secondary collision reduction hazard warning light can be turned off by pressing the hazard warning switch two times.
High-mount brake light
-
License plate lights
-