REAR ACCESSORY SOCKET INSPECTION

id092100901000

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Partially peel back the trunk side upper trim (RH). (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION.)

3.  Partially peel back the trunk side trim (RH). (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

4.  Remove the rear accessory socket. (See REAR ACCESSORY SOCKET REMOVAL/INSTALLATION.)

5.  Connect the tester probe to the position shown in the figure and verify that there is continuity.

am6zzw00008241

•  If it cannot be verified, replace the rear accessory socket. (See REAR ACCESSORY SOCKET REMOVAL/INSTALLATION.)