BAROMETRIC PRESSURE (BARO) SENSOR INSPECTION [MZR-CD (RF Turbo)]

id0140f1818700

Note

•  Perform the following inspection only when directed.

•  The following vacuum values are indicated by relative pressure from the PCM.

Sensor Output Value Inspection

1.  Switch the ignition to ON.

2.  Monitor the MAF PID using the M-MDS. (See PCM INSPECTION [MZR-CD (RF Turbo)].)

3.  If not as specified, replace the PCM. (See PCM REMOVAL/INSTALLATION [MZR-CD (RF Turbo)].)