DTC U0483:68 [INSTRUMENT CLUSTER]

id0902e8989100

DTC U0483:68

Signal error from AFS control module
Detection Condition
Correct data cannot be received from AFS control module
Possible Causes
•  AFS control module malfunction
•  Instrument cluster malfunction

Diagnostic Procedure

Step

Inspection

Action
1
VERIFY AFS CONTROL MODULE DTCs
•  Perform the AFS control module DTC inspection.
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection. After repair procedure, go to the next step.
(See DTC TABLE [AFS (ADAPTIVE FRONT LIGHTING SYSTEM)].)
No
Go to Step 3.
2
VERIFY TROUBLESHOOTING COMPLETED
•  Clear the DTC from the instrument cluster using the M-MDS.
•  Verify the instrument cluster DTC using the M-MDS.
•  Is the same DTC present?
Yes
Replace the instrument cluster.
(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
Go to the next step.
No
Go to the next step.
3
VERIFY THAT NO OTHER DTCs ARE PRESENT
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [INSTRUMENT CLUSTER].)
No
DTC troubleshooting completed.