DTC U0483:92 [INSTRUMENT CLUSTER]

id0902e8989200

DTC U0483:92

On request from AFS control module

Detection Condition

Illumination command signal from AFS control module continues for 20 s or more

Possible Causes

• AFS control module malfunction

• Instrument cluster malfunction

DTC U0483:92	On request from AFS control module
Detection Condition	Illumination command signal from AFS control module continues for 20 s or more
Possible Causes	• AFS control module malfunction • Instrument cluster malfunction

Diagnostic Procedure

Step	Inspection		Action
1	VERIFY AFS CONTROL MODULE DTCs • Perform the AFS control module DTC inspection. (See DTC INSPECTION [AFS (ADAPTIVE FRONT LIGHTING SYSTEM)].) • Are any DTCs present?	Yes	Go to the applicable DTC inspection. After repair procedure, go to the next step. (See DTC TABLE [AFS (ADAPTIVE FRONT LIGHTING SYSTEM)].)
1		No	Go to Step 3.
2	VERIFY TROUBLESHOOTING COMPLETED • Clear the DTC from the instrument cluster using the M-MDS. • Verify the instrument cluster DTC using the M-MDS. (See DTC INSPECTION [INSTRUMENT CLUSTER].) • Is the same DTC present?	Yes	Replace the instrument cluster. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.) Go to the next step.
2		No	Go to the next step.
3	VERIFY THAT NO OTHER DTCs ARE PRESENT • Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [INSTRUMENT CLUSTER].)
3		No	DTC troubleshooting completed.