FUEL INJECTOR INSPECTION [13B-MSP]

id0114z2800700

Resistance Inspection

1.  Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [13B-MSP].)

2.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP].)

3.  Disconnect the negative battery cable.

4.  Remove the extension manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [13B-MSP].)

5.  Disconnect the fuel injector connector.

6.  Measure the resistance between terminals A and B of the fuel injector.

ar8uuw00000844

•  If not within the specification, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION [13B-MSP].)