CLUTCH PEDAL POSITION (CPP) SWITCH INSPECTION [13B-MSP]

id0140g1801600


Continuity Inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP].)

2.  Disconnect the negative battery cable.

3.  Disconnect the CPP switch connector.

4.  Verify that the continuity between CPP switch terminals B and D is as indicated in the table.

ar8uuw00001581

•  If there is any malfunction, replace the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION.)

Measurement condition

Clutch pedal position

Continuity
Push the rod
Clutch pedal released
No continuity
Except above
Clutch pedal depressed
Continuity detected