PCM REMOVAL/INSTALLATION [13B-MSP]

id0140g1802400

U.K. specs.

2. Disconnect the negative battery cable.

3. Remove in the order indicated in the table.

4. Install in the reverse order of removal.

5. When replacing the PCM on the vehicles, perform the following:

• PCM configuration (See PCM CONFIGURATION [13B-MSP].)

• Immobilizer system component replacement/key addition and clearing (See IMMOBILIZER SYSTEM-RELATED PARTS PROGRAMMING [WITH KEYLESS ENTRY SYSTEM].)

ar8wzw00001163

1

PCM cover

2

PCM bracket No.1

3

PCM bracket No.2

(See Set Bolt Removal Note.)

(See Set Bolt Installation Note.)

4

PCM connector

5

PCM

6

PCM bracket No.3

Set Bolt Removal Note

1. Using a chisel and a hammer, cut a groove on the head of the set bolt so that a screwdriver can be inserted.

2. Loose the set bolt using an impact screwdriver or pliers.

am6zzw00000120

Set Bolt Installation Note

1. Install a new set bolt and tighten it until the neck of the bolt is cut.

am6zzw00000121

Except for U.K. specs.