NO.3 SYSTEM DOES NOT LOAD MAP DISC. [CAR-NAVIGATION SYSTEM]

id0903e8812000

3

System does not load map disc.
POSSIBLE CAUSE
•  Non-designate disc is installed
•  Map disc malfunction
•  Moisture inside of car-navigation unit
•  Car-navigation unit malfunction
Note
•  If dewdrops are formed inside of the car-navigation unit, the display screen shows the “The disc installed is not map DVD” message. Remove the map disc, ventilate or remove moisture from the passenger compartment, and then leave it for approx. 1h. The dewdrops will be removed and the car-navigation unit will operate normally.
•  In case of a dirty/damaged map disc or car-navigation unit malfunction, the display screen will show the “Please insert a map DVD” message after the ignition switch to turned to the ACC position.
•  If a non-designated disc inserted, the display screen shows the “The disc installed is not a map DVD” message.

Diagnostic procedure

STEP

INSPECTION

ACTION
1
•  Eject the map disc.
•  Is the map okay?
Yes
Go to the next step.
No
Insert a designated disc, then go to the next step.
2
•  Eject the map disc then insert the map disc again.
•  Does the system load the map disc?
Yes
Troubleshooting completed.
No
Go to the next step.
3
•  Eject the map disc and clean the surface of map disc with a soft cloth.
•  Insert the map disc again.
•  Does the “MAP DVD-Read Error.” error message show up on the screen?
Yes
Troubleshooting completed.
No
Replace the car-navigation unit and map disc at the same time. (consult distributor)
(See CENTER PANEL UNIT REMOVAL/INSTALLATION.)
(See CENTER PANEL UNIT DISASSEMBLY/ASSEMBLY.)