CENTER PANEL UNIT REMOVAL/INSTALLATION

id092000800600

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Shift lever knob (MT) (See TRANSMISSION REMOVAL/INSTALLATION [P66M-D].)

(2)  Shift knob (AT) (See SELECTOR LEVER REMOVAL/INSTALLATION.)

(3)  Upper panel (See CONSOLE REMOVAL/INSTALLATION.)

(4)  Ashtray panel (See CONSOLE REMOVAL/INSTALLATION.)

(5)  Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

With audio unit

ar8uuw00002195

With car-navigation unit

ar8uuw00002196

1	Bolt
2	Screw
3	Center panel unit (See Center Panel Unit Removal Note.)
4	Connector
5	Antenna feeder

4.  Install in the reverse order of removal.

Caution

•  When installing the center panel unit, make sure that the wiring harness and antenna feeder are not caught between the unit and dashboard. If the wiring harness or the antenna feeder is caught between the unit and dashboard, it may cause malfunctions.

Center Panel Unit Removal Note

1.  Detach the clips from the dashboard while pulling the center panel unit outward, and then remove the center panel unit.

With audio unit

ar8uuw00001041

With car-navigation unit

ar8uuw00001042