REAR SPEAKER INSPECTION
id092000802500
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)
- (2) Console (See CONSOLE REMOVAL/INSTALLATION.)
- (3) Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
- (4) Rear pillar trim (See REAR PILLAR TRIM REMOVAL/INSTALLATION.)
- (5) Rear package side trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)
- (6) Rear package center trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)
- (7) Rear speaker (See REAR SPEAKER REMOVAL/INSTALLATION.)
3. Verify the resistance between rear speaker terminals.
-
• If the resistance is not within the specification, replace the rear speaker.
-
Resistance
-
Without Bose®: 4 ohms
With Bose®: 1.8 ohms