CONDENSER REMOVAL/INSTALLATION

id092000803000

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)

(2)  Console (See CONSOLE REMOVAL/INSTALLATION.)

(3)  Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

(4)  Rear pillar trim (See REAR PILLAR TRIM REMOVAL/INSTALLATION.)

(5)  Rear package side trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)

(6)  Rear package center trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

ar8uuw00001051

1	Bolt
2	Connector
3	Condenser

4.  Install in the reverse order of removal.