NOISE FILTER REMOVAL/INSTALLATION
id092000806400
Brake Light Noise Filter
-
Note
-
• The brake light noise filter is integrated with the vehicle wiring harness.
Rear Defroster Noise Filter
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)
- (2) Console (See CONSOLE REMOVAL/INSTALLATION.)
- (3) Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
- (4) Rear pillar trim (See REAR PILLAR TRIM REMOVAL/INSTALLATION.)
- (5) Rear package side trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)
- (6) Rear package center trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)
3. Remove the bolt.
4. Disconnect the connector.
5. Remove the rear defroster noise filter.
6. Install in the reverse order of removal.