SOLENOID VALVE REMOVAL/INSTALLATION[GF4AX-EL]

id051703804600

1.  Remove the control valve body. (See CONTROL VALVE BODY REMOVAL/INSTALLATION[GF4AX-EL].)

2.  Remove the solenoid valve(s).

atraaw00002040

3.  Apply ATF to a new O‐ring and install it on the solenoid valve.

4.  Install the solenoid valve in the control valve body.

Tightening torque
6.5—7.8 N·m {66—80 kgf·cm, 58—69 in·lbf}

5.  Install the control valve body. (See CONTROL VALVE BODY REMOVAL/INSTALLATION[GF4AX-EL].)

6.  Add the ATF while the engine is idling, and inspect the ATF level and leakage. (See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION[GF4AX-EL].) (See AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT[GF4AX-EL].)

7.  Perform the time lag test and line pressure test. (See MECHANICAL SYSTEM TEST[GF4AX-EL].)