|
STEP
|
INSPECTION
|
ACTION
|
|
1
|
VERIFY FREEZE FRAME DATA HAS BEEN RECORDED
• Has FREEZE FRAME DATA been recorded?
|
Yes
|
Go to next step.
|
|
No
|
Record FREEZE FRAME DATA on repair order, then go to next step.
|
|
2
|
VERIFY RELATED SERVICE INFORMATION AVAILABILITY
• Check for related Service Information availability.
• Is any related Service Information available?
|
Yes
|
Perform repair or diagnosis according to available Service Information.
• If vehicle is not repaired, go to next step.
|
|
No
|
Go to next step.
|
|
3
|
VERIFY RELATED PENDING CODE OR STORED DTC
• Verify the related PENDING CODE or stored DTCs.
• Are other DTCs present?
|
Yes
|
Go to appropriate DTC inspection.
|
|
No
|
Go to next step.
|
|
4
|
INSPECT ACCELERATOR PEDAL AND CABLE LINKAGE
• Verify that the accelerator pedal and cable are installed correctly.
• Is there any malfunction?
|
Yes
|
Reinstalled or replace as necessary, then go to Step 5.
|
|
No
|
Go to next step.
|
|
5
|
INSPECT TP SENSOR
• Inspect the TP sensor.
• Is there any malfunction?
|
Yes
|
Replace TP sensor, then go to next step.
|
|
No
|
Go to next step.
|
|
6
|
VERIFY TROUBLESHOOTING OF DTC P0121 COMPLETED
• Make sure to reconnect all disconnected connectors.
• Clear DTC from memory using WDS or equivalent.
• Start engine.
• Perform "KOEO/KOER self-test"
• Is same DTC present?
|
Yes
|
Replace PCM, then go to next step.
|
|
No
|
Go to next step.
|
|
7
|
VERIFY AFTER SERVICE PROCEDURE
• Perform "AFTER SERVICE PROCEDURE".
• Is there any DTC present?
|
Yes
|
Go to applicable DTC inspection.
|
|
No
|
Troubleshooting completed.
|