• Malfunction in the 4WD lock indicator light control circuit
|
STEP
|
INSPECTION
|
ACTION
|
|
|---|---|---|---|
|
1
|
INSPECT 4WD SWITCH
• Inspect the 4WD lock switch.
• Is the 4WD lock switch normal?
|
Yes
|
Go to the next step.
|
|
No
|
Replace the 4WD lock switch.
|
||
|
2
|
INSPECT 4WD LOCK INDICATOR LIGHT WIRING HARNESS FOR SHORT TO POWER SUPPLY
• Turn the ignition switch off.
• Disconnect the 4WD lock switch connector.
• Turn the ignition switch to the ON position.
• Measure the voltage between the 4WD lock switch vehicle-side terminal B and ground.
• Is the voltage less than 1.0 V?
|
Yes
|
• Inspect the instrument cluster. (See INSTRUMENT CLUSTER INSPECTION [L3].)(See INSTRUMENT CLUSTER INSPECTION [EXCEPT L3].)
• If there is any malfunction, repair or replace the applicable part.
|
|
No
|
Repair or replace the wiring harness between 4WD lock switch terminal B and instrument cluster terminal 1A.
|
||