AZ82.80-P-0003-03CW Retrofit Mount For Tablet PC

AZ82.80-P-0003-03CW Retrofit Mount For Tablet PC
- MODEL 164.1## /8##, 204.0## /2## /9##, 212.0## /2##, 218.3##, 221.0## /1##, 251.0## /1##, 221.0## /1## 1#

The following work procedure is shown on the right side of the vehicle. Installation on the left side of the vehicle is performed correspondingly.






1 Slide Tablet PC mount (3) onto previously installed bracket.
2 Connect black 3-pin coupling (6.2) of wiring harness (6) to Tablet PC mount (3).
3 Route wiring harness (6) into opening in the backrest.
4 Slide Tablet PC mount (3) further onto bracket until the lower edge of the Tablet PC mount (3) rests on the backrest.
5 Tighten Tablet PC mount (3) using the screws/bolts (19) included in the installation kit from the front onto the bracket.