Overhaul

AR91.18-P-1800-01GZ Remove SRS airbag emblem from rear seat seat cover
- except CODE (293) Left and right sidebag

Component Identification:

In order to minimize variety, the cover of the rear seat backrest can only be obtained with the "SRS Airbag" emblem (1). In order to avoid mix-ups, the emblem must be removed on vehicles without sidebag at the left and right rear, code 293.

1 Cut out the "SRS Airbag" emblem (1) on the outside of the rear seat backrest cover as close to the seam as possible.
2 Remove the remainder of the "SRS Airbag" emblem (1) on the inside of the rear seat backrest cover (3).

Do not separate or damage the seam, as the rear seat backrest cover will then be unusable.