Connecting Rod Refinishing Dimensions
| Center of Big End Bearing Bore to Center of Small End Bushing Bore | 148.95 - 149.05 | |
| Width of Connecting Rod at Big End Bearing Bore and Small End Bushing Bore | 31.84 - 31.88 | |
| Basic Bore for Big End Shell Bearings | 55.60 - 55.62 | |
| Basic Bore for Small End Bushing | Normal Size | 29.00 - 29.02 |
| Repair Size | 29.50 - 29.52 | |
| Small End Bushing Outer Diameter | Normal Size | 29.096 - 29.058 |
| Repair Size | 29.596 | |
| Small End Bushing Inner Diameter | 26.012 -26.018 | |
| Peak to Valley Height of Small End Bushing Inside | 0.004 mm | |
| Permissible Twist of Big End Bearing Bore to Small End Bushing Bore, Relative to Length of 100 mm | 0.1 | |
| Permissible Parallel Misalignment of Big End Bearing Bore Axis to Small End Bushing Bore Axis, Relative to Length of 100 mm | 0.045 | |
| Permissible Difference in Weight Between Any Two Con-Rod Assemblies within One Engine | 5 |