Cylinder Head Torque & Sequence
CAUTION: The cylinder head bolts M10 x 165, M10 x 90 and M10 x 65 are 10 mm longer than for cast-iron engines.| Tightening Sequence | See Image | |
| Tightening Torque Tighten cylinder head bolts (M10) with a cold engine in the sequence shown in three stages, tightening all the bolts to the stage 1 spec and going back to retighten the bolts to the second stage. Wait 10 minutes between stage 2 and 3. | Stage 1 | 30 Newton Meter (Nm) |
| Stage 2 | 60 Newton Meter (Nm) | |
| Stage 3 | 60 Newton Meter (Nm) First, slightly loosen bolts individually in order of tightening diagram and then retorque them to specification shown in order of tightening diagram. |