Remove/Install

REMOVAL:

Control Unit:

1. Remove ashtray with holder.
2. Pull out wooden panelling with control unit in forward direction and pull 4 bulb sockets as well as the two 12-pole couplers from control unit.

Control Unit:

3. Unscrew both screws at the left and right (arrow) and remove control unit from wooden panelling.

INSTALLATION:
1. Insert control unit into wooden panelling and mount by means of two screws.
2. Plug 12-pole couplers left and right, as well as 4 bulb sockets to control unit.
3. Insert wooden panelling with control unit into center console.
4. Install holder with ashtray.