Operation CHARM: Car repair manuals for everyone.
Home >> Mercedes Benz >> 1982 >> 380SL (107.045) V8-3.8L (116.960) >> Repair and Diagnosis >> Restraints and Safety Systems >> Relays and Modules - Restraints and Safety Systems >> Air Bag Control Module >> Service and Repair >> Removal and Replacement >> Supplementary Work When Installing Modified Control Unit (1/3)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Supplementary Work When Installing Modified Control Unit (1/3)







NOTE: After the installation of a modified airbag control unit (airbag 1/3) part no. 004 820 11 10 supplementary jobs will be necessary:

Table:





1. In addition to modified control unit install either line A or line B (table) depending on what control unit was installed in the vehicle.
2. Additional work:





- Remove voltage transformer (N24) (not present in all vehicles) and insulate plug connector (3). Service and Repair
- Remove reserve power source (C1) and insulate plug connector (2). Service and Repair
- Fasten cables to existing cable harness using cable straps.
- Test airbag system using airbag tester, part no. 126 589 10 21 00.


pro multis · About Operation CHARM