Impulse Counter Scan Tool

013 Impulse counter scan tool
075 Adaptor for impulse counter scan tool
087 Hand-Held Tester (HHT)
094 Multiplexer, 965 589 00 40
X11/4 Data link connector

Connecting Impulse Counter Scan Tool:
Connect adaptor (075) to X11/4 and connect impulse counter scan tool to the adaptor as follows:
Red wire (circuit 30, voltage) Socket 3
Black wire (circuit 31, ground) Socket 1
Yellow wire Socket 8

NOTE: DTC's which have been stored due to testing or disconnecting of lines must be erased from the DTC memory at the end of testing.