Operation CHARM: Car repair manuals for everyone.
Home >> Mercedes Benz >> 1994 >> SL 320 (129.063) L6-3.2L (104.991) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Central Electronics Box >> Service and Repair >> Control Module Box, Remove/Install
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module Box, Remove/Install








1 Bracket
2 Bracket
3 Screws
4 Screws
5 Control module bracket
X11/4 Data link connector

1. Remove cover on right of engine compartment.
2. Remove module box control modules.
3. Detach brackets (1, 2).
4. Remove data link connector (X11/4).
5. Unscrew screws (3, 4).
6. Disconnect blower motor connector.
7. Take out control module bracket (5).

Installation Note: Check gasket for damage and correct seating and replace if necessary.

8. Pull wiring harnesses out of module box housing.
9. Remove module box housing.
10. Install in reverse order.

Special Tool:




pro multis · About Operation CHARM