Replacement

TIGHTENING SPECIFICATIONS


Rear Axle Center Assembly To Front To Rear Axle Carrier 50 Nm
Front Rear Axle Center Assembly To Rear Axle Carrier 50 Nm
Rear Rear Axle Center Assembly To Rear Axle Carrier 110 Nm
Rear Axle Shaft To Connecting Flange 70 Nm
Rear Axle Center Assembly Breather 25 Nm
Flexible Disk To Rear Propeller Shaft Or Rear Axle Center Assembly:
10 mm 40 Nm
12 mm 60 Nm
Propeller Shaft Intermediate Bearing To Frame Floor:
Bolt With Washer 25 Nm
Bolt With Collar And Centering Tip 30 Nm