Remove/Install Control Module For Automatic A/C (AAC)

Removing and installing pushbutton control module

Shown On Model 129:

1 Pull out A/C pushbutton control module (N22)

NOTE:
For this purpose insert removal tools (1)
- Press back retaining springs (arrow) on removed pushbutton control module and pull out removal tools (1).

2 Disconnect connectors (2, 3) on A/C pushbutton control module (N22)

NOTE: Unhook connectors by pivoting retaining strap.

3 Reinstall in opposite order.

NOTE: Installation: When replacing automatic A/C pushbutton control module on models 140, 202, 208, 210, version coding must be carried out.