Keyless Entry Receiver: Service and Repair

AR80.30-P-4305M Remove/Install Front Door Infrared Remote Control Receiver

Illustrated On Model 220:

1 Pull out plug (1) in area of door lock
2 Unscrew mounting screw for left front IR receiver (A26/1) with Torx socket wrench (2)

NOTE: Secure mounting screw against falling down from Torx socket bolt (e.g. magnetizing Torx socket wrench)

- Screw for door handle on front door: 3 Nm

3 Carefully remove left/right front IR receiver (A26/1, A26/2)
4 Disconnect electrical connector (3)

CAUTION: When installing ensure electrical connector (3) is clipped correctly

5 Install in opposite order
6 Check of power windows for proper function (one-touch window up feature).