Headlamp Alignment Control Module: Service and Repair

Remove/Install Headlight Beam Adjustment Control Module
- with CODE (612b) Xenon headlamp unit






Remove/Install
1 Remove cover below instrument panel (left)
2 Disconnect connector from headlamp range adjustment control module (N71)
3 Unscrew headlamp range adjustment control module from mount of extended activity module (EAM)

NOTE: 2 nuts.

4 Remove headlamp range adjustment control module (N71)
5 Install in the reverse order
6 Adjust headlamp into zero position using STAR DIAGNOSIS
7 Inspect headlamp adjustment, correct if necessary.