GF82.70-P-2015SK Electronic Mail (E-Mail), Function

GF82.70-P-2015SK Electronic Mail (e-mail), Function
- with CODE (386) Preinstallation for telephony "Portable CTEL", UPCI system
- with CODE (388) Telephone "Portable CTEL", UPCI system

The deadline for the electronic mail (e-mail) function cannot be exactly limited to 31.05.05. The e-mail function will be omitted as it is phased into production.

Function requirements:
^ The portable CTEL (A34/6) must be inserted into the UPCI [UHI] portable CTEL holder (Universal Handy Interface) (A34/15).
^ The portable CTEL (A34/6) and the radio (A2), with code (523) MB Audio 20 radio, the radio and navigation unit (A2/56), with code (525) MB Audio 50 APS radio, or the COMAND operating, display and control unit (A40/3), with code (527) COMAND APS using single DVD drive (with navigation) or with code (530) COMAND APS USA (with navigation system) are activated.
^ The Personal Identification Number (PIN) is entered
^ The portable CTEL (A34/6) is registered in the cellular mobile telephone network.
^ The provider settings for the Post Office Protocol 3 (POP3) server (for receiving e-mails) and for the Simple Mail Transfer Protocol (SMTP) server (for sending e-mails) have been made.

A POP3 server saves all incoming e-mails in an intermediate memory and does not transfer them until the user calls them up. If the automatic delete function is active, the intermediate memory for e-mails is not used.

Display location
The e-mails can be read as listed in the following:
^ On the display of the portable CTEL (A34/6)
^ On the display of the radio (A2), with code (523) MB Audio 20 radio, the radio and navigation unit (A2/56), with code (525) MB Audio 50 APS radio, or the COMAND operating, display and control unit (A40/3), with code (527) COMAND APS with single DVD drive (with navigation) or with code (530) COMAND APS USA (with navigation system)
^ In the upper multifunction display (A1p13) of the instrument cluster (A1)

Creating
The e-mails can be written and sent exclusively via the keypad of the radio (A2), with code (523) MB Audio 20 radio, the radio and navigation unit (A2/56), with code (525) MB Audio 50 APS radio, or the COMAND operating, display and control unit (A40/3), with code (527) COMAND APS using single DVD drive (with navigation) or with code (530) COMAND APS USA (with navigation system). It is only possible to write texts, in other words adding attachments (e.g., pictures, WORD documents, EXCEL tables) such as with a PC is not possible.

Functions
The following e-mail functions are available:
^ Receive, write, and send e-mails
^ Save, forward, and reply to e-mails
^ Write new e-mails, send them or save them as a draft
^ List all received e-mails sorted by the date they were received (different list representation according to the attributes for "read", "not read" and "protected" e-mails)
^ E-mails received can be deleted automatically and manually; secured ("protected") e-mails can only be deleted manually
^ Maximum message length < 600 byte
^ Maximum number of stored e-mails: 50
^ 20 predefined sentences
^ An e-mail can be sent directly ("TO") and as a copy ("CC")
^ Manual entry of the e-mail address by selecting it from a list or automatically from the address book
^ Manual e-mail inquiry on server possible
^ Message when new e-mails have been received on the POP3 server
^ Logs:
SMTP, POP3, Transmission Control Protocol/Internet Protocol (TCP/IP)

The TCP ensures that the data are transmitted without error between the sender and the receiver, while the IP packs the data in so-called datagrams, which contain, in addition to the actual useful data, control data such as the protocol version, the datagram size, the control total, the source and the target address.