AZ82.60-P-0001-02VAA Retrofit iPod Wiring Harness

AZ82.60-P-0001-02VAA Retrofit iPod Wiring Harness

Component Identification:

1 Drill hole with a diameter (A) of 19 mm in glove box as shown. Rechargeable drill / screwdriver
gotis://G_58.0_01.1







2 Slide interface coupling of iPod wiring harness (8) from the inside out of glove box through drilled hole.
3 Plug hole with grommet (9) of iPod wiring harness (8).
4 Fix iPod wiring harness (8) in place at glove box (arrow).

The interface coupling of iPod wiring harness (8) is connected to the interface connector at a later time.
The iPod coupling of the iPod wiring harness (8) will be connected to the iPod at a later point in time.