AZ82.60-P-0001-03VC Retrofit iPod Interface

AZ82.60-P-0001-03VC Retrofit iPod Interface
- with CODE (527) COMAND APS with single DVD drive (with navigation)
- with CODE (512) COMAND APS with DVD changer


1 Centrally align two of the Velcro strips (2) included in package contents and press together firmly.
2 Remove protective foil from one Velcro strip (2) and glue Velcro strips (2), as illustrated, onto rear of iPod interface (1).
3 Bond iPod interface (1) with felt tape (3) as illustrated.







4 Connect black iPod wiring harness coupling (10) to iPod interface (1).
5 Connect blue 18-pin coupling (7) to iPod interface (1) and lock in place.
6 Assemble white 2-pin connector (8) on iPod interface wiring harness (2) and white 2-pin coupling (12) on iPod wiring harness (9) and fix in place on iPod interface (1) using felt tape.







7 Clean bonding surfaces on inside of instrument panel (16).

The bonding surface must be dry, free of dust and grease.

8 Remove protective foil from Velcro strip on iPod interface (1) and glue iPod interface (1), as illustrated, onto inside of instrument panel (16).

Observe routing of electrical wiring harnesses.