GF82.61-P-4001SK Destination-Oriented Navigation In Non-Digitalized MAP Area, Function

GF82.61-P-4001SK Destination-Oriented Navigation In Non-Digitalized Map Area, Function
- with CODE (525) MB Audio 50 APS radio
- with CODE (527) COMAND APS with single DVD drive (with navigation)


The navigation processor of the radio and navigation unit (A2/56) with code (525) Audio 50 APS MB radio is integrated into the control unit. With the COMAND operating, display and controller unit (A40/3) with code (527a) COMAND APS (with navigation), the external navigation module is designated as navigation processor (N41/1).

When traveling outside the digitized map area (e.g. company grounds, multi-level car parks, field paths, etc.), but still within the DVD-ROM map boundaries, the navigation processor (N41/1) switches over to "Destination-oriented navigation in non-digitized map area".
The message "OFF ROAD" appears on the display. If the vehicle is outside the DVD-ROM map boundary (outside the country), the message "OFF MAP" appears.

In both cases only a basic location finding with correction is performed by the global positioning system (GPS) Limited destination-oriented navigation takes place while only specifying:
^ Straight-line distance to the destination
^ Direction to destination (as an arrow)

After reentering the digitized map area, the system automatically continues with "Destination-oriented navigation in digitized map area".
The GPS position can be used to determine the possible roads, on which the vehicle may be located. During this process a slight delay in the destination-oriented navigation may result.

When the message "OFF MAP" appears, complete destination-oriented navigation can be continued by inserting the proper DVD-ROM for the foreign country.

The time synchronization between the COMAND operating, display and controller unit (A40/3) (with code (527a) COMAND APS (with navigation)) and the instrument cluster (A1) must be performed when driving in other "time zones" (time delay, daylight-savings).