GF82.60-P-5000RC Media Interface Control Unit, Component Description

GF82.60-P-5000RC Media Interface Control Unit, Component Description
- with CODE (518) Media interface

Component Identification:

Location
The media interface control unit is located in the glove box.

Depending on the equipment version, one of the following audio devices is installed (hereinafter called "Audio equipment"):
- Radio (A2), with code (510) Audio 20 with CD changer, with code (523) MB Audio 20 radio
- Radio and navigation unit (A2/56), with code (525) MB Audio 50 APS radio or with code (511) Audio 50 APS with DVD changer
- COMAND operating, display and controller unit (A40/3), with code (527) COMAND APS with single DVD drive (with navigation) or with code (512) COMAND APS with DVD changer

Task
^ Receiving signals
^ Transmitting signals

Receiving signals
^ Direct lines
^ Media Oriented System Transport (MOST)

Direct lines
- Power supply, circuit 31 and circuit 30 over G+H connector
- Audio signals and data from the media interface connector 1 (X18/67) over the Mitsumi CAM62 connector
- Electronic wake-up for MOST over G+H connector

MOST
- Control signal from the "audio equipment" via MOST 2+0 connector

Transmitting signals
^ Direct lines
^ MOST

Direct lines
- Power supply to media interface connector 1 in general and for USB over Mitsumi CAM62 connector
- Control signal to media interface connector 1 over Mitsumi CAM62 connector

MOST
- Audio signals and data to "audio equipment" via MOST 2+0 connector