GF77.30-P-3005SK Vario Roof Stop Mode, Function

GF77.30-P-3005SK Vario Roof Stop Mode, Function
- up to model year 08

Function prerequisites:
^ No overvoltage or undervoltage
^ Vario roof not in locked end position

Function
If the actuation request of the Vario roof operation is interrupted due to erroneous or incorrect input value, the Stop mode is actuated.During the Stop mode. the solenoid valves for the Vario roof are actuated so that the Vario roof does not move anymore and the Vario roof is arrested.If the "Open or close Vario roof" operation is reenabled and another actuation request is present, the Vario roof operation is started or continued.
As soon as the Stop mode is activated, a warning message "Vario roof in operation" appears on the display of the instrument cluster (A1)

When the Stop mode is activated, the Vario roof is arrested upon:
^ C. 15 ON for 7 min
^ C. 15 OFF for 15 s

If the sequence of the power soft top control unit (N52) is not enabled, the Stop mode is reactuated when it receives an actuation request and the stop time is automatically increased:
^ C. 15 ON for 7 min
^ C. 15 OFF for 15 s

If a solenoid valve responsible for Stop mode function is defective, the Stop mode is not started