AH01.30-P-1000-02V Notes on Sealant Path For Front Cover to Cylinder Head

AH01.30-P-1000-02V Notes on sealant path for front cover to cylinder head

Application of sealant to the right front cover:

Application of sealant to the right front cover
The line (A) identifies the sealant run.

The sealing compound must only be applied along the line (A) in the form of a bead with a height and width of 1.0 mm (+0.5 mm).

The sealing compound must be applied within 10 min.

The sealant bead must not be spread. Only the approved seal be used.

Application of sealant to the left front cover:

Application of sealant to the left front cover