AH01.30-P-1000-08V Notes on Application of Sealant to Cylinder Head Cover
AH01.30-P-1000-08V Notes on application of sealant to cylinder head cover
Sealant beads on the right cylinder head cover:
Sealant beads on the right cylinder head cover
The lines (A) identify the sealant beads.
The sealant must be applied along the specified lines (A) in the form of a sealant bead of
1.0 mm ±0.2 mm.
The sealant must be applied within 10 min.
The sealant bead must not be spread. Only the approved sealant may be used.
Sealant beads on the left cylinder head cover:
sealant beads on the left cylinder head cover
The lines (A) identify the sealant beads.
The sealant must be applied along the specified lines (A) in the form of a sealant bead of
1.0 mm ± 0.2 mm.
The sealant must be applied within 10 min.
The sealant bead must not be spread. Only the approved sealant may be used.