AH01.30-P-1000-08V Notes on Application of Sealant to Cylinder Head Cover

AH01.30-P-1000-08V Notes on application of sealant to cylinder head cover

Sealant beads on the right cylinder head cover:

Sealant beads on the right cylinder head cover
The lines (A) identify the sealant beads.

The sealant must be applied along the specified lines (A) in the form of a sealant bead of 1.0 mm ± 0.2 mm.

The sealant must be applied within 10 min.

The sealant bead must not be spread. Only the approved sealant may be used.

Sealant beads on the left cylinder head cover:

sealant beads on the left cylinder head cover
The lines (A) identify the sealant beads.

The sealant must be applied along the specified lines (A) in the form of a sealant bead of 1.0 mm ± 0.2 mm.

The sealant must be applied within 10 min.

The sealant bead must not be spread. Only the approved sealant may be used.