AR40.20-P-0230A Attach Mercedes-Benz Rapid-Clamping Devices
Attaching Mercedes-benz Rapid-clamping Devices
Model 163:
NOTE: Check MB rapid-clamping devices, wheel mirrors and measurement sensors at regular intervals in accordance with the manufacturer's instructions
1 Attach MB rapid-clamping devices to front and rear axles and remove clamp handles
NOTE: The mounting bell is centered on the front wheel hub or rear axle shaft flange by locating the tracer pins in the 5 mounting holes (arrows) in the rim
2 Attach wheel mirrors or measurement sensors
3 Detach in the reverse order