AR46.20-P-0004P Remove/Install Protective Cap For Input Shaft on Steering Gear
AR46.20-P-0004P Remove/Install Protective Cap For Input Shaft On Steering Gear
MODEL 169, 171, 203, 204, 209, 211, 230, 245
MODEL 207, 212 with hydraulic power steering
Shown on model 203, left-hand drive vehicle
1 Clamps
2 Bellows
3 Inner tie rods with axial joints
14 Steering gear housing
16 Stop ring
Model 169 up to 30.3.05, left-hand drive vehicle
4 Protective cap
Model 169, 245, right-hand drive vehicle
5 Marking
Model 169 as of 31.3.05, model 245, left hand drive vehicle
6 Marking
Shown on model 203, left-hand drive vehicle
4 Protective cap
5 Marking
6 Marking
Shown on model 203, right-hand drive vehicle
4 Protective cap
5 Marking
6 Marking
Shown on model 211, left-hand drive vehicle
4 Protective cap
5 Marking
6 Marking
Shown on model 211, right-hand drive vehicle
4 Protective cap
5 Marking
6 Marking
Model 207, 212 with hydraulic P/S, 230, shown on model 230, left-hand drive vehicle
4 Protective cap
5 Marking
6 Marking
Shown on model 230, right-hand drive vehicle
4 Protective cap
5 Marking
6 Marking
221 589 01 31 00
Steering gear housing support
201 589 00 01 00
Open end wrench
169 589 00 01 00
Open-end wrench bit
221 589 02 09 00
Plug in open-end wrench