AR33.15-P-0160-03T Remove/Install Rubber Boots on Rubber Mount

AR33.15-P-0160-03T Remove/install rubber boots on rubber mount

Component Identification:

Only assemble rubber boots on hydro mounts (B). Assembly is not envisaged on conventional rubber mounts (A).

Component Identification:

The rubber boots (18e) should be fitted to protect the hydro-mounts (18d) of the strut rod (18).

The rubber boots (18e) are not fitted ex works. The rubber mounts (18e) should be retrofitted for repair work on the strut rod (18) or hydro-mount (18d).

The rubber boots (18e) are only pushed over the bearing core and the bearing outer race of the hydro-mount (18d).
Attach rubber boot (18e) flush with the strut rod (18) (arrows).