Rear Axle

AR35.20-P-0114-01V Remove/install spring control arm rubber mount

Special Tools:

Component Identification:

Removing
1 Press rubber mount (6b) out of spring control arm using the removal and installation tool (06a, 06b).

In order to be able to press out severely seized rubber mounts (6b) accurately, press out the small protrusion of the rubber mount as far as the spring link bush using a flat pressure plate (06x).

Component Identification:

Install
2 Use the press out/in tool (06a, 06b) to press the rubber mount (6b) into the spring control arm until both ends of the steel jacket sleeve have the same distance to the spring link bush.