GF27.19-P-5104-01N Electric Controller Unit, Design

GF27.19-P-5104-01N Electric controller unit, design
- TRANSMISSION 722.9

Component Identification:

Design
The electric controller unit (VGS) (Y3/8) consists of a plastic supporting body in which the following electrical components are combined:
^ Turbine speed sensor (VGS) (Y3/8n1)
^ Internal speed sensor (VGS) (Y3/8n2)
^ Output speed sensor (VGS) (Y3/8n3)
^ Fully integrated transmission control (VGS) control unit (Y3/8n4) with integrated transmission oil temperature sensor (VGS) (Y3/8s2)
^ Selection range sensor (VGS) (Y3/8s1)
^ Working pressure control solenoid valve (VGS) (Y3/8y1)
^ Clutch control solenoid valve K1 (VGS) (Y3/8y2)
^ Clutch control solenoid valve K2 (VGS) (Y3/8y3)
^ Clutch control solenoid valve K3 (VGS) (Y3/8y4)
^ Brake control solenoid valve B1 (VGS) (Y3/8y5)
^ Brake control solenoid valve B2 (VGS) (Y3/8y6)
^ Brake control solenoid valve B3 (VGS) (Y3/8y7)
^ Torque converter lockup clutch control solenoid valve (VGS) (Y3/8y8)

The printed-conductor foil which is inserted in the supporting body makes the connection between the electrical components and a plug socket (11).

The connection to the cable set on the vehicle side is made with a bayonet lock via the plug socket (11).

Apart from the solenoid valves all the other electrical components are permanently connected to the printed-conductor foil.